What to do if the power supply or power supply switch light is not working?

Things to try if the power supply or power supply switch light is not working: Check power to the socket and reconnect the Pool Cleaner. Check that there is voltage in the power socket in the wall. Check that the power supply is plugged in and turned ON. Check that the power cable is securely connected all the way into the power supply. Turn the power supply off, wait 30 seconds, then turn it back on. Consult with your dealer and Service Center.

My robotic pool cleaner slips and can't climb the wall — what should I do?

The most common reason robotic pool cleaners suddenly stop climbing your pool wall is because the surface becomes slippery due to algae build-up. When algae starts to build up in your pool it forms a thin transparent film over the hard surface of your pool. It is slippery and causes all robots to lose grip, preventing your cleaner from climbing up. It is only as time passes and the algae is left untreated that it becomes visible, usually more so in certain areas. Unfortunately, the robot cannot be fixed to overcome this issue. The best course of action is to use a reputable algicide.

How to fix the Pool Cleaner motor?

To fix the Pool Cleaner motor: Remove the impeller tube and clean the impeller. Clean the tracks and wheels. If the issue persists, consult with your dealer and Service Center.

How to stop the Pool Cleaner moving in circles?

Possible reasons and corrective actions: Remove dirt from moving parts. Clean filter bag/basket/cartridge. Remove debris stuck in the impeller-house or impeller-cover. Place the power supply in a position so that the Pool Cleaner can reach all walls. Lock the bottom lid in the right position. Correct pool and water conditions. Refer to the pool cleaner manual on the product page.

How to make the Pool Cleaner cover the entire pool?

Possible reasons and corrective actions: Place the power supply in a position so that the Pool Cleaner can freely reach all the pool area. Check that there is enough slack in the floating cable for the Pool Cleaner to reach all of the pool. Clean the filter bag/basket/cartridge. For M Line models: you may enhance pool coverage by adjusting the handle float. For optimal pool coverage the Pool Cleaner should turn on the floor at a 90 degree angle (it rotates twice before completing the 90 degree turn). If it does not complete a 90 degree turn, shift the float opposite to the cable entry-side towards the handle center. If it turns wider than 90 degrees, shift the float on the cable entry-side towards the handle center.

How to fix cable twisting?

Possible reasons and corrective actions: Remove any obstruction in the pool. Remove excess cable from the pool. Clean the filter bag/cartridge. Straighten the cable and lay it in the sun periodically.

Is there any warranty for my robotic pool cleaner service?

Yes, all Robotic Repairs service work comes with a comprehensive 12-month warranty on all parts replaced. This gives you real peace of mind knowing you are backed with industry-best warranty terms.

Where can I get my robotic pool cleaner repaired?

Australia-wide. Maytronics has service technicians all around the country ready to provide you with the best repair service possible. You won't have to send your cleaner interstate with lengthy delay times caused by transportation.

How long should my robotic pool cleaner last before needing a replacement?

Maytronics Dolphin robotic pool cleaners are much more durable than the old suction cleaners of days gone by. Generally, you can expect years of service from your quality Dolphin robotic pool cleaner. The more expensive robots are generally higher quality and come with a longer warranty — you do get what you pay for. If you keep your robotic pool cleaner in good condition, it will extend its lifetime.

What is the Maytronics For Life Program?

Unlock and enjoy exclusive Maytronics For Life Program access when you purchase a premium Dolphin robotic pool cleaner (Liberty 400 / M700 / S400) or Mineral Swim System. The Maytronics For Life Program offers a 30-day satisfaction guarantee, a trade-in guarantee, an annual robot health check, and lifetime professional support. For terms and conditions and to register, visit maytronics.com.au/forlife/

What is the Mineral Swim Customer Care Plan?

Have peace of mind knowing you're backed by the Maytronics 12-month Customer Service Guarantee. Maytronics will send a professional pool maintenance team to your pool after 6 weeks and 6 months of installation to ensure your Mineral Swim pool is healthy. Simply register for your poolside health check at mineralswim.com.au/register.

What does Always Connected mean for my Dolphin pool cleaner?

Always Connected lets you control and communicate with your Dolphin robotic pool cleaner using your home Wi-Fi. Register it online and control it remotely via the app on your smart device. Always Connected means you always have control of your Dolphin in your hand at any time from anywhere, with real-time connectivity.

What is the MyDolphin Plus app?

The MyDolphin Plus app lets you control your Dolphin robotic pool cleaner through your smartphone or tablet. It is packed with easy-to-use functions — schedule cleaning cycles and navigate your Dolphin to hard-to-reach areas for total coverage. Make your pool perfect from anywhere at any time.

What is the Interactive Digital Interface (MMI)?

The MMI (Man-Machine Interface) is an intuitive digital control system for seamless operation and machine analysis. Key features include a filter full indicator, operation delay, and multiple automatic modes such as Drive to Pool and Drive Home, ensuring effortless control with minimal hassle.

What is the Dynamic Dual Drive Motor?

The Dynamic Dual Drive Motor features CleverClean technology and a gyroscope for optimal pool manoeuvrability and coverage, regardless of pool shape, slope, and obstacles.

What is CleverClean Smart Navigation?

CleverClean is an advanced scanning software and navigation system that ensures floors, walls, and the waterline are fully covered using the most efficient route. The robotic pool cleaner automatically navigates around obstacles and quickly returns to its cleaning pattern.

What is the Self Diagnostic Software feature?

Self-diagnostic software continuously monitors the system for peak performance and gives an alert if there are any errors.

What is the Whisper Quiet Operation feature?

The Whisper Quiet Operation features a silent mode which slows the variable speed fan for quiet operation.

What is the Fully Automatic pH Dosing System?

The Fully Automatic pH Dosing System is a fully automatic pH dosing system with a probe that takes all the hard work out of maintaining your swimming pool's pH water balance. This innovative system automatically adjusts the pool's pH levels, reducing the need for manual testing and chemical adjustments.

What is a flocculant and why is it good for my swimming pool?

A flocculant attracts tiny particles in the water together to form a bigger particle. This helps the filter to catch the combined particles and your pool robot (cleaner) to pick them up. Both magnesium and ozone in the Mineral Swim system act as a flocculant.

Is the Mineral Swim system Made in Australia?

Yes. The Maytronics Mineral Swim system is Made in Australia, so you can be assured of a high-quality product, backed by a leading warranty and expert customer service.

Do you have a question?

Search examples :

Frequently asked questions
About Maytronics
Press to display subcategories
- General specifications
- Movement and cycles
- Walls & obstacles
- Safety usage
- Accessories
- Press to display subcategories
  - Robot
  - Connectivity
Press to display subcategories
- General specification
Press to display subcategories
- Robot
- Water Treatment
Press to display subcategories
Press to display subcategories
Press to display subcategories
- Press to display subcategories
- Press to display subcategories
  - Dolphin Skimmi™ 200/300 Use & Maintenance
  - Dolphin Skimmi™ 200/300 Troubleshooting
Press to display subcategories
- Of my Robot
- Of my Water Treatment

Is my Dolphin robotic pool cleaner safe to use?

The power supply unit (22V - 29V) sends a low voltage current to the robotic pool cleaner.

There is no major risk of electrocution.

Make sure that the electrical outlet is protected by an earth leakage circuit breaker or an earth leakage switch.

Make sure that the power supply unit is always positioned at least 3.5m from the pool. Keep the power supply away from any stagnant water.

For your safety and the safety of others, do not enter the pool while the robot is in operation.

Has this information been useful?

Thanks for your feedback!

Need more information?

Contact Us

Back

Hi. How can we help?

Do you have a question?

Explore the knowledge base

Is my Dolphin robotic pool cleaner safe to use?

Need more information?

Hi. How can we help?

Do you have a question?

You can also choose a category

Explore the knowledge base

Is my Dolphin robotic pool cleaner safe to use?

Need more information?

Related questions