The new high-capacity battery supports four cleaning modes, ensuring a full coverage cleaning of most residential pools (up to 15m):

• Full Coverage – 3 hours (Floor, Walls + Waterline)

• Floor Only – 3 hours

• Ultra-Clean – 2 hours (Floor, Walls + Waterline) This setting utilises the full power of the impeller to boost suction!

• Eco Mode (Combined cleaning time is up to 4 hours. The cleaning configuration can be set through the app.)

You can activate Eco Mode either directly on the robot interface or through the MaytronicsOne App.

Setting Eco Mode on the Robot Interface:

1. Press the button with three dots (•••) until the weekly scheduler LED lights up.
2. This will automatically set Eco Mode to Regular cleaning (60-minute cycles, 3 times a week).

Setting Eco Mode via the MaytronicsOne App:

1. Open the MaytronicsOne App.
2. Navigate to select a cleaning mode and select "Eco."
3. Under the Eco tab, choose your preferred cycle configuration:

Half-week: 2 sessions (90 min each) every 72 hours.

One week: 3 sessions (60 min each) every 72 hours. (Default setting)

Two weeks: 6 sessions (40 min each) every 48 hours.

If the Homing feature is set, between Eco mode cycles, at the end of the cleaning cycles, the robot will wait at the selected wall.

Using the Clicker in Eco Mode will cancel the upcoming scheduled cycles.